intermediate

End Survey Screens

Customize thank-you screens, termination messages, completions, screen-outs, quota full / over quota pages, and already-submitted (duplicate response) end pages — plus terminate redirects after survey complete or early complete

12 min readUpdated October 31, 2026

End Survey Screens

End Survey Screens control what respondents see at survey end — the finish screen / end page after a full complete, an early complete, a termination (screen-out / DQ), a quota full (over quota) outcome, or an already-submitted (duplicate response) attempt.

In market research terms, these are your thank-you screens, termination pages, and terminate redirects. You set the title and message for each outcome, optionally add redirect URLs (including conditional rules), and choose one icon style that applies to all end screens. Logic and quotas decide when someone lands on a screen; End Survey Screens decide what they see and where they go next.

Where to find them

1

Open your survey in the Survey Builder.

2

Scroll to the bottom of the question canvas.

3

Expand End Survey Screens.

The section sits below your last question. When anything is customized, the header shows a Customized indicator. Expand it to edit, preview, save, or reset.

Tip

Changes in End Survey Screens are not saved until you click Save Changes in the sticky bar at the bottom of the section. Switching away without saving discards unsaved edits.

The four end screens

ScreenWhen respondents see itCommon MR terms
Screened OutThey don't qualify — for example, an End survey logic rule marked as Screened Out, or option navigation set to Screened OutTermination / terminate / terminated, disqualification / disqualify / DQ, screened out / screen out
Quota FullA quota cell they fall into is already fullQuota full, over quota
Already SubmittedRetakes are blocked (restrict by device and/or IP in Survey Settings) and they try again after completingAlready submitted, duplicate response
Survey CompleteThey finish the survey — either all questions, or early via logic / option navigation marked as Complete (or Early Complete)Survey complete, completion / completions, full complete, early complete, thank you screen, finish screen, survey end

Survey Complete covers full and early finishes

You configure one Survey Complete screen. It is used both when someone answers through to the end (full complete) and when logic or option navigation ends the survey early and marks them Complete (early complete / early termination that still counts as a complete). You do not maintain separate “early complete” and “full complete” message cards.

Default titles and messages (until you customize them):

ScreenDefault titleDefault message
Screened OutThank You for Your InterestBased on your responses, you do not qualify for this survey at this time. We appreciate you taking the time to participate.
Quota FullSurvey Quota ReachedWe have already received enough responses for your demographic group. Thank you for your willingness to participate.
Already SubmittedResponse Already SubmittedOur records show you have already submitted a response to this survey. Thank you for your participation.
Survey CompleteThank You!Your response has been successfully recorded. We appreciate you taking the time to share your feedback.

Screen icon (shared for all end screens)

At the top of the expanded End Survey Screens section, Screen icon applies to every end screen:

OptionEffect
Default iconsStatus icons — a green check for Survey Complete, a blue check for the other screens
Custom logoUpload a logo that replaces the default icons on all end screens
No iconTitle and message only — no icon or logo

If you choose Custom logo, upload an image with the uploader that appears. Until a logo is uploaded, respondents still fall back to the default icon behavior for display purposes in preview until a file is set and saved.

This icon setting is separate from logos in Survey Look & Feel. Look & Feel brands the survey while people are answering; Screen icon only affects end screens.

Edit vs Preview

Use the Edit / Preview toggle in the End Survey Screens section:

  • Edit — change titles, messages, default redirect URLs, redirect delay, and conditional redirect rules
  • Preview — see each screen as respondents will (title, message, and icon). If a redirect is configured, Preview shows a footer note such as “You will be redirected in 3 seconds…” — it does not navigate away

Preview is for checking copy and branding before you save. Use the survey Preview / test link to walk through real logic paths end to end.

Customize titles and messages

For each screen in Edit mode:

  1. Update the title (short headline).
  2. Update the message (supporting text respondents read before any redirect).
  3. Optionally set redirects (next section).
  4. Click Save Changes.

Title and message both accept Insert recall. The control’s tooltip is Insert recall / piping; the menu heading is Insert recall. You can pull in answers, embedded data, and the same tokens you use in question text. Preview fills those tokens in with the recalled wording.

Keep titles short and messages clear. If you redirect after a few seconds, write copy people can read in that window — or set delay to 0 only when you intentionally want an immediate handoff.

Redirects (including terminate redirects)

Each screen can send respondents to another URL after the message is shown — for example a panel terminate redirect, a completion thank-you page, or a vendor status URL. Redirects are optional.

Default redirect URL

Enter a full URL (for example https://example.com/thank-you) in the default redirect field for that screen.

You can insert piping tokens into the URL with the clipboard / insert control — for example embedded data like campaign_id={{ed.campaign_id}}, or recalled answers — so panel vendors or downstream sites receive identifiers. See Embedded Data and Piping and Recall.

Redirect delay

Redirect delay (seconds) controls how long the end screen stays visible before navigating:

  • Default is 3 seconds so respondents can read the message
  • 0 redirects immediately
  • Maximum is 300 seconds (5 minutes)

The same delay applies whether the destination comes from a matching conditional rule or the default URL.

Conditional redirects

Under Conditional Redirects, add rules that send different people to different URLs based on answers or embedded data.

For each rule you can:

  • Turn the rule on or off
  • Give it an optional name
  • Set a Redirect URL (required)
  • Build conditions (at least one required) using the same condition builder as survey logic — earlier answers and embedded data
  • Reorder rules (move up / down) — rules are evaluated top to bottom; the first matching enabled rule wins
  • Delete rules you no longer need

If no conditional rule matches (or none are configured), Quali-Fi uses the Default Redirect URL for that screen. If that is also empty, other redirect sources may still apply (see priority below).

Note

A conditional rule needs both a URL and at least one condition. Use the default redirect as the fallback for everyone who does not match a rule.

Redirect priority (what wins)

When an end screen is shown and a redirect is about to run, Quali-Fi generally resolves the destination in this order:

  1. A one-off redirect override from the session (when present)
  2. Panel exit URL when that path is set to prefer the panel URL
  3. The first matching conditional redirect on the end screen
  4. The screen’s default redirect URL
  5. Panel / External Panel exit URLs (when configured and available)
  6. A return URL on the session (when present)

Third-party panel note: For live External Panel sessions with a rid, Quali-Fi typically hands respondents straight to the matching panel exit URL on complete, terminate, or quota full — without lingering on the end screen. Put vendor status URLs in Panel Audience Distribution. Use End Survey Screens for messages and for redirects on non-panel traffic. Details: Third-party panels and exit links.

Test mode and redirects

In test / preview sessions, Quali-Fi only follows redirects that come from the end screen itself (default URL or conditional rules). Panel exit redirects are not fired from test traffic, so you can verify messages without sending test completes back to a panel provider.

Third-party panels and exit links

When you field through Distribute → Send to Panel Audience → External Panel, exit links (Complete, Terminate, Quota Full, optional Quality Terminate / Speeder, plus Default) live on the External Panel page — not in this End Survey Screens section.

ConcernWhere to configure
Panel entry URL with rid=[RID]External Panel
Vendor exit / status URLs by dispositionExternal Panel
Thank-you / termination title, message, iconEnd Survey Screens (this section)
Redirect delay and conditional rulesEnd Survey Screens (mainly non-panel or when an end screen is shown)

Respondent experience with External Panel + rid (live, not test):

  1. Survey ends as complete (including early complete), screened out / terminate / DQ, or quota full.
  2. Quali-Fi resolves the matching External Panel exit URL.
  3. The browser navigates to that URL for panel reconciliation — typically immediately at submit time.

When End Survey Screens still matter for panel studies:

  • Preview / test mode (panel exits are suppressed; end-screen redirects can still run)
  • Already Submitted / duplicate retake blocks (no dedicated External Panel exit for this outcome)
  • Non-panel traffic to the same survey
  • Cases where an end screen is shown before redirect (for example some quota-full-at-entry paths)

Full setup, disposition mapping, placeholders, and common mistakes: Panel Audience Distribution.

How respondents experience end screens

  1. The survey ends for one of the four reasons above (unless a live panel exit handoff navigates away first — see above).
  2. Respondents see the matching title, message, and icon (or custom logo / no icon).
  3. If a redirect is configured, a short footer note may indicate they will be redirected, then Quali-Fi navigates after the delay you set.
  4. If there is no redirect, they remain on the end screen.

In kiosk distribution, a successful complete still uses the Survey Complete message, then the kiosk flow can move to the next-respondent prompt. Redirect behavior still follows your end-screen and distribution settings.

Connecting logic and options to end screens

End Survey Screens do not decide who qualifies — your survey logic and quotas do.

End survey from display logic

In question Display Logic, choose End survey and mark the outcome as:

  • Screened Out → Screened Out screen (termination / DQ / screened out)
  • Quota Full → Quota Full screen (over quota)
  • Complete → Survey Complete screen (completion, including early complete)

See Survey Logic & Branching.

End survey from an option

On choice options, use navigation / go-to controls to send respondents to an end screen:

  • Screened Out (terminate / disqualify)
  • Quota Full
  • Early Complete (uses the same Survey Complete screen and message)

That is useful for screener questions where a single choice should terminate immediately (early termination or early complete, depending how you mark the outcome).

Already Submitted and security settings

The Already Submitted screen appears when Restrict Multiple Responses is enabled in Tools → Survey Settings:

  • Restrict by device — uses a device key in the browser
  • Restrict by IP address — may be strict on shared networks (offices, campuses, VPNs)

Respondents can usually resume an in-progress response, but after a completed response they see Already Submitted instead of starting over.

Setup checklist

1

Open End Survey Screens

In the Survey Builder, expand End Survey Screens at the bottom of the canvas.

2

Choose the screen icon

Pick Default icons, Custom logo, or No icon. Upload a logo if you chose custom.

3

Edit each outcome you care about

Update title and message for Survey Complete at minimum. Customize Screened Out, Quota Full, and Already Submitted when those paths are active in your survey.

4

Add redirects if needed

Set a default URL and delay per screen. Add conditional rules for language-specific thank-you pages or segment-specific destinations. For third-party panel status / exit URLs, use External Panel. Pipe embedded data into URLs when downstream sites require IDs.

5

Preview and save

Switch to Preview in the section, then Save Changes. Walk the live survey Preview / test link through screen-out, quota, complete, and (if enabled) retake paths.

Tips

  • Write Screened Out and Quota Full copy that is polite and final — people should not think they can continue.
  • Use conditional redirects when one complete URL is not enough (for example different thank-you pages by language or embedded source).
  • Fielding multiple panels on one survey? Capture panel plus the panelist ID in Embedded Data and add per-panel conditional redirects for screenout, quota full, and complete — see Multiple Panel Redirects.
  • For third-party panel status codes on a single External Panel deployment, configure exit links under External Panel — do not rely on End Survey Screens alone for vendor reconciliation.
  • Keep redirect delay at 3 seconds (or higher) when the message carries important instructions; use 0 only for silent handoffs.
  • End-screen logos are not a substitute for Look & Feel header logos — set both if you need branding during the survey and on the thank-you screen.
  • After Reset to Defaults, click Save Changes if you want the defaults persisted; Reset only restores the editor until you save.

Limitations and related settings

  • End screens are not translated as a separate multi-language editor in this panel — plan copy for your primary respondent language, or use redirects to localized pages when needed.
  • Preview inside End Survey Screens does not evaluate conditional redirect rules or navigate; it shows the message layout and delay hint only.
  • Quotas must be configured separately; this panel only customizes the Quota Full message and redirect.
  • External Panel entry and exit / status URLs are configured under distribution — see Panel Audience Distribution.

Related

Was this article helpful?