intermediate

Survey Builder Deep Dive

Overview of key Survey Builder features including settings, embedded data, respondent location, triggers, randomization, templates, and end screens (thank-you, terminations, quota full)

14 min readUpdated October 31, 2026

Survey Builder Deep Dive

This video is a deeper walkthrough of the Survey Builder module in Quali-Fi, focusing on core concepts and where to find key settings.

In the left Sections list you can drag a question onto another question in the same section to change order, or onto a different section to move it. See Creating Surveys.

The section Settings gear now includes Persistent Content — keep a concept, image, or video on screen for every question in that section. See Persistent Content. Question Display Logic includes Skip to section as well as skip to a question; see Survey Logic & Branching.

Survey health

In the builder top bar, to the left of Tools, the Survey health control estimates completion time and surfaces logic issues, privacy reminders, and design suggestions while you work. Click a finding to jump to the related question or rule.

Full details: Survey Health.

Survey Settings

Tools → Survey Settings covers the survey name, description, member portal visibility, restricted access (Access IDs), start and end dates, awards, Save & continue later, and related options. Generating or importing Access IDs happens on Distribute after you set Restricted (requires access ID) — see Restricted Survey Access. Restricted surveys can also generate an optional Open Access Link on Distribute that skips the Access ID gate. Save & continue later lets respondents email or text a resume link — see Save & Continue Later.

Auto-advance after answer

Enable Auto-advance after answer so eligible single-answer questions move forward shortly after a complete selection (about half a second). Multi-answer and complex questions still use Next, and the last step never auto-submits. The setting is off by default. Full details: Creating Surveys.

Embedded Data

Tools → Embedded Data is where you define respondent-level metadata for a survey—panel IDs, campaign codes, wave numbers, and similar values that should travel with each response without being asked as a question.

Legacy Q-Fi users will recognize this as sample variables.

From the Embedded Data panel you can:

  • Add fields with a Key and Type (String, Number, Boolean, Date, JSON, or Choice List)
  • Set optional defaults, display names, and sort order
  • Control Reportable (Raw Data, analytics, reports — on by default), Exportable (CSV/SPSS — on by default), and Contains PII flags

Values arrive through survey link query parameters, field defaults, or both. Choice List fields only accept URL values that match a configured choice value.

Use embedded data in logic, quotas, piping ({{ed.field_key}}), end-screen redirect URLs, analytics, and exports.

For step-by-step setup, URL examples, and field-type details, see Embedded Data.

Respondent Location

Tools → Respondent Location captures browser-reported device location once at survey start—before the first question—with Optional or Required tracking, a custom consent message, accuracy and retry rules, and optional reverse-geocoded place fields.

Location values land as response metadata (alongside IP / OS / browser), not as question answers, and coordinate / address fields follow respondent PII view and export controls.

This is separate from Interactive Map geolocation, which only assists pin placement on a map question. Full setup: Respondent Location (Geo Tagging).

End Survey Screens

At the bottom of the Survey Builder canvas, End Survey Screens control the thank-you / finish screens respondents see when they complete, get terminated (screened out / DQ), hit a full quota (over quota), or try to retake a blocked survey (already submitted / duplicate response).

From that section you can:

  • Choose a shared Screen icon (default status icons, a custom logo, or no icon)
  • Edit title and message for Screened Out, Quota Full, Already Submitted, and Survey Complete
  • Set default redirect URLs, redirect delay, and conditional redirect rules per screen (including terminate redirects)
  • Switch between Edit and Preview before saving

Survey Complete is a single screen for both full completes and early completes via logic. For the full how-to, see End Survey Screens. For third-party panel exit links (complete, terminate / DQ, quota full), configure redirects under Panel Audience Distribution — not only in End Survey Screens.

Video transcript

  • 00:07 deeper dive into the new Qualify Survey Builder module. To access the Survey Builder, either create a new survey or edit an existing survey.
  • 00:20 While in the Surveys module, you can just Just click on the survey and that will take you into the builder.
  • 00:26 Now I'll, collapse the main menu here so we can take a closer look at all the features within the Survey Builder.
  • 00:40 First, to rename your survey, you can just click on the survey name and change the name from here. Or you can do that in Tools under Survey Settings.
  • 00:50 This is where you can give it a name, add a description if needed. And a description is useful if you have, Insights Community and you want to add a description for panelists to see a little bit more about the survey that you've deployed to the community.
  • 01:06 You can also assign or deploy the survey to different member portals if you have them. and this is where you can set visibility for invitations.
  • 01:15 Additionally, this is where you can set the survey to be a restricted survey We can also set the start and end date for the survey so that it goes off, so that it's disabled on the end date.
  • 01:41 If the survey was being deployed to a Insights panel, you can also activate, awards from here, so we can award panelists for completing the survey.
  • 01:49 Since we're on tools, we're going to keep looking at this, so we have the embedded data. For users of the old Q-Fi system, this would be the equivalent to sample variables.
  • 02:04 So embedded data is basically respondent-related data that you can store for each respondent. So, for example, if we're setting up a panel, you can store, like, a UID, define the, value type, and this is really the only required field that you need to enter, and then we can also make it available in
  • 02:27 report and export. modules. Once you're done creating, just, save, and now your new embedded data is available.
  • 02:37 Moving on, we have, triggers. So, you can set up email triggers. So, these are emails that go out to stakeholders or anybody else that needs to receive an email based on a respondent completion or custom logic.
  • 02:53 This applies to sending SMS triggers as well And when recruiting members to a video interview, you can set up a trigger here so that when the member finishes a screening survey, they get an invitation to schedule their video interview.
  • 03:09 Next, we have, ah, block randomization. So this is similar, for, for those of you who have used, ah, the older version of QFI, this is closer to a group setup.
  • 03:26 So where we could set up multiple groups and have them randomize. This has been changed to block randomization. So from here, we can set up different blocks.
  • 03:35 For example, a block could be one section or more. So let's say we select the overall experience section and key experience driver section for block one.
  • 03:51 Then for block two, we could select performance and importance rating. So now we've checked off randomized blocks, so that means these blocks, these These two blocks will randomize, and we can click on continue to add more blocks if needed.
  • 04:08 just to summarize that, a block can contain multiple sections, and we can create multiple blocks, and have those blocks be randomized.
  • 04:19 Next, in Tools, we have the Roxy AI Simulator, and this is where we can simulate data using Roxy Simulator. Now, you can define the number of responses you need, And you can also define a persona that Roxy would use to answer questions.
  • 04:35 As if it had that personality. test, let's we'll start simulation, and now it'll start, ah, taking the survey to generate two completed cases.
  • 04:56 Once completed, Roxy will present the summary of how many completed records were created. Now moving on in the Survey Builder, we'll look at the Sections sidebar in the left side of the screen.
  • 05:10 So here you can drag and move sections around if you need to resize or reposition them. You can also move questions from one section to another.
  • 05:19 And within the section header, you have the option to add, skip logic, for an entire section. Or from here, you can also duplicate a section, which would basically create a new duplicate version of that entire section, including all questions.
  • 05:37 Then we have the delete option. This deletes all questions in that section and the section. Now, while viewing a section, you can also use the section settings icon here to access some additional settings.
  • 05:50 For the section, where you can select the option to show section heading if needed. That would be the text for each section.
  • 05:58 So, this is making it visible to respondents. Or hide the entire section, which means the respondents will not see any of the questions in the section.
  • 06:07 You can also choose to show all the, all the questions on, all the questions within this section only. On one screen.
  • 06:14 Or choose to add a, or choose to add a timer for this section. So, this would be a countdown timer that you can show the countdown to the respondents, in case you want to give them a sort of a time challenge to finish the section within a certain amount of the time.
  • 06:34 for any question you've added to the survey, if you need any additional properties or settings, simply click on the question settings.
  • 06:40 This will open up the question settings on the right side. And here, you can then different changes to the questions.
  • 06:48 So, you can make it required or optional, hide the question, randomize the options, set a timer, a display timer for this question, add display time, display logic, or terminate based on this, on answers from this question as well.
  • 07:04 and if this survey was being sent to Insights Community members, you You can also create a profile field that will then map to the data for this question.
  • 07:15 So it gets added to their member's profile. So depending on the question type, you'll have different settings in this, properties area.
  • 07:25 And we'll cover all the different settings in future videos. Now, for any question, if you want to add a specific question to your template, simply click on Templates.
  • 07:35 this will then allow you to save this question as a template question. And whenever you want to use the template, click Save.
  • 07:42 Click on Add New Question, then Browse Templates, and you'll be able to select from the list of templates that have saved for your account.
  • 07:50 a new duplicated version of this question.
  • 08:01 if we need to add group headers in a question, simply click add group and this will give you a group header.
  • 08:11 And we can add multiple group headings within a choice list if needed. Within a choice list, you also have these different properties that you can assign to specific choices.
  • 08:20 Like, setting up a skip logic or go-to question, so if someone selects this far exceeds expectations, we can send them to one of these questions.
  • 08:35 Or we can add visibility logic, which allows us to show this option based on a specific Like. Love. logic configuration.
  • 08:46 If this is an open-end choice, we can apply the other specify. If it was an exclusive, none of the above, we can apply the exclusive option.
  • 08:54 And if we needed it, if we needed to exclude it from randomizations, we would just, check the fix to bottom.
  • 09:02 Pin, option, and then delete to delete that option from the choice list. Now moving on, we have the end survey screens.
  • 09:12 So these are screens that respondents would see when they complete the survey, or they get terminated, or we've hit the quota full target, or the quota is full for the group that they're in.
  • 09:24 customize the messages that they would see, and, and set up the redirect links to If they were screened out, quotafilled, or completed.
  • 09:37 collecting embedded variables or sample variable data, you can also recall those into the link from here. are made here, click Save, and now our redirect is set up and ready to go.
  • 09:54 Now, that was an overview of some of the major features within the Survey Builder in Qualify. In future videos, we'll be going into specific settings and configurations for different question types, different research methodologies.
  • 10:09 Hope this video was helpful. Thanks for watching.

Related documentation

Was this article helpful?